Search Results

The Simulation Model of Automobile Collisions (SMAC) computer program has seen more than a decade of use under NHTSA auspices. Although SMAC has proven itself to be a useful investigative tool, the program has several shortcomings which either have been addressed by the authors or need to be addressed by further work. This paper presents the results of our ongoing work to improve SMAC and our recommendations for further work. Those model features discussed herein which either have been or need to be revised consist of (1) the calculation of crush forces when penetration is deep (2) the representation of the vehicles' crush pressure vs deflection relationship and (3) the distribution of tire normal forces in reaction to pitch and roll. An input interfacing program called SMACED has been written and is discribed. This editing program greatly simplifies the use of SMAC and will be found particularly useful for the inexperienced or infrequent SMAC user.

Far-side lateral impacts were simulated using a Part 572 dummy and human cadavers to compare responses for several belt restraint configurations. Sled tests were conducted having a velocity change of 35 km/hr at a 10 g deceleration level. It was estimated from field data that a 35 km/hr velocity change of the laterally struck vehicle represents about an 80th percentile level for injury-producing lateral collisions. Subjects restrained by a three-point belt system with an outboard anchored diagonal shoulder belt (i.e., positioned over the shoulder opposite the side of impact) rotated out of the shoulder belt and onto the seat. The subject received some lateral restraint due to interaction with the shoulder belt and seatback. The subjects restrained by a three-point belt system with an inboard anchored diagonal shoulder belt (i.e., positioned over the shoulder on the side of impact) remained essentially upright due to shoulder belt interaction with the neck and/or head.

Classical blunt thoracic impacts have involved midsternal anteroposterior loadings to an upright-positioned subject. Data on the sensitivity of human cadaver and/or animal model biomechanical and injury responses to blunt loadings at different sternal locations is needed to evaluate the efficacy of current injury-potential guidelines for nonsite-specific frontal impacts. In addition, the biomechanics and injury mechanisms associated with lateral impacts constitute a subject of increasing consideration for occupant protection. Twelve anesthetized pigs were subjected to various blunt frontal or a right-side impact to assess biomechanical and injury response differences in a living animal model.

The purpose of this paper is to present a comparison of whole body, target impingement knee impact response for a Part 572 dummy versus that for anthropometrically similar embalmed human cadavers. “Response” is defined here to include the impact force-time history as sensed by 1) femur load cells, and 2) impingement target load cells for the dummy and by the target load cells for the cadavers. The data presented demonstrate significantly higher peak forces and correspondingly shorter pulse durations for the dummy than for the companion cadaver subjects under similar test conditions and at all velocity levels investigated. For the dummy, the ratio of forces measured by the femur load cells to those measured by the impingement target load cells averaged eight tenths.

Five anesthetized porcine subjects were exposed to blunt thoracic impact using a 21 kg mass with a flat contact surface traveling at 3.0 to 12.2 m/s. The experiments were conducted to assess the appropriateness of studying in vivo mechanical and physiological response to thoracic impact in a porcine animal model. A comprehensive review of comparative anatomy between the pig and man indicates that the cardiovascular, respiratory and thoracic skeletal systems of the pig are anatomically and functionally a good parallel of similar structures in man. Thoracic anthropometry measurements document that the chest of a 50 to 60 kg pig is similar to the 50th percentile adult male human, but is narrower and deeper. Peak applied force and chest deflection are in good agreement between the animal's responses and similar impact severity data on fresh cadavers.

Previous studies of human thoracic injury tolerance and mechanical response to blunt, midsternal, anteroposterior impact loading were reported by the authors at the 1970 SAE International Automobile Safety Conference and at the Fifteenth Stapp Car Crash Conference. The present paper documents additional studies from this continuing research program and provides an expansion and refinement of the data base established by the earlier work. Twenty-three additional unembalmed cadavers were tested using basically the same equipment and procedures reported previously, but for which new combinations of impactor mass and velocity were used in addition to supplementing other data already presented. Specifically, the 43 lb/11 mph (19.5 kg/4.9m/s) and 51 lb/16 mph (23.1 kg/7.2 m/s) conditions were intercrossed and data obtained at 43 lb/16 mph (19.5 kg/7.2 m/s) and 51 lb/11 mph (23.1 kg/4.9 m/s).

One of the greatest challenges faced in the design of realistic occupant protection systems is an accurate statistical model of what is really needed. The paucity of data is this realm hinders designers of standards alike. Ideally, a model of crash statistics would correlate, for significant accident modes, injury level (as measured by AMA Abreviated Injury Scale “AIS”) with some adequate measure of crash intensity. Having this information, not only could the required level of safety design be ascertained, but also the justifiable economic expenditure could be estimated. This paper treats the statistical basis for deployment of a data retrival system. It provides a basis for estimates of the amount of data required, the number of vehicles to be instrumented, the crash severity trigger levels, and the economics of recorder installation, for various levels of injury and fatality.

At the 1970 SAE International Automobile Safety Conference, the first experimental chest impact results from a new, continuing biomechanics research program were presented and compared with earlier studies performed elsewhere by one of the authors using a different technique. In this paper, additional work from the current program is documented. The general objective remains unchanged: To provide improved quantification of injury tolerance and thoracic mechanical response (force-time, deflection-time, and force-deflection relationships) for blunt sternal impact to the human cadaver. Fourteen additional unembalmed specimens of both sexes (ranging in age from 19-81 years, in weight from 117-180 lb, and in stature from 5 ft 1-1/2 in to 6 ft) have been exposed to midsternal, blunt impacts using a horizontal, elastic-cord propelled striker mass. Impact velocities were higher than those of the previous work, ranging from 14-32 mph.